-
Epoxy mortar 100% bicomponent. For the general adhesion of construction elements, in installations where high effort and impact resistance are required.
-
Two-component thixotropic putty based on polyester resin for natural and artificial stones of general use. Its appearance is paste and once hardened acquires the mechanical and aesthetic characteristics of the target surfaces. Easy to apply, excellent sanding and polishing. Ideal to repair, join, glue or grout surfaces in: − Marble − Limestone − Granite − Quarztone
-
CLASIFICATION NTC 6050-2014CG2AWCementitious material for joints with improved performance, fast setting, high resistance to abrasion, and reduced water absorption.DESCRIPTIONHydro cement nozzle and Oil repellent modified with adhesion latex and flexibility for joints from 1 to 6 mm. Contains additives that act as a barrier that prevents substances that fall on the joints from penetrating and irreversibly soiling. Better adhesion More flexibility Repels water and oil stains. Resistant to difficult stains. Easy to clean and maintain. Low absorption
-
CLASIFICATION NTC 6050-2014CG2AWCementitious material for joints of improved performance with high resistance to abrasion and reduced water absorption.DESCRIPTIONHydro-repellent cementitious nozzle modified with adhesion latex and flexibility for joints from 1 to 6 mm. It does not contain sand. Easy cleaning Not very absorbent Easier to use. Do not shrink or crack. Easy application
-
CLASIFICATION NTC 6050-2014C2S1TEH2I2P2Cementitious adhesive with improved characteristics, deformable, fast setting, with resistance to sliding, extended open time, high adhesive resistance to heat and immersion in water, with improved adhesion for wood.DESCRIPTIONSTON MIX® FACHADAS is a cement-based mono-component adhesive highly modified with latex-type polymers to obtain high adhesion and flexibility in the installation of natural stone or low absorption ceramic (porcelain) in facades. Due to its excellent formulation it is ideal for installations in external areas in general, with constant variations in temperature, wind currents, wetting and drying cycles.STON MIX® FACADES contains additives that decrease the setting time, which gives greater initial strengths compared to conventional cement-based adhesives, this characteristic is desirable when vertical installations are carried out at high altitudes. STON MIX® FACHADAS is easy to prepare and highly manageable, it does NOT require the application of latex emulsions in the mixing water. You just need to add water. Note: The use of this adhesive for the bonding of facades does not replace the ties that must be used according to NSR-10. Please consult the standard for clarity.
-
CLASIFICATION NTC 6050-2014C2S2TEH2I2P2Cementitious adhesive with improved characteristics, deformable, with resistance to sliding, extended open time, high adhesive resistance to heat and immersion in water, with improved adhesion for wood.DESCRIPTIONSTON MIX® LATEX FLEX is a mono-component cementitious adhesive modified with latex-type polymers with high adhesion and flexibility to obtain highly effective adhesives in installations of low absorption coatings or high coefficients of linear expansion, such as some natural stones and ceramics. low absorption (porcelain). Ideal for areas that will be exposed to external environmental conditions, with constant variation of temperature, air currents, presence of rain or high traffic.Thanks to its specialized formulation, in addition to ensuring excellent flexibility and adhesion, it has an excellent level of water retention and wetting, allowing a longer working time than any conventional adhesive and the possibility of installing on absorbent and deformable substrates such as flat fiber cement sheets. . STON MIX® LATEX FLEX is easy to prepare and highly manageable, it does NOT require the application of latex emulsions in the mixing water. You just need to add water. Ideal for use on substrates or coatings that have high deformations.
-
CLASIFICATION NTC 6050-2014C2S1TEH2I2P2Cementitious adhesive with improved characteristics, deformable, with resistance to sliding, extended open time, high adhesive resistance to heat and immersion in water, with improved adhesion for wood.DESCRIPTIONSTON MIX® LATEX FLEX is a mono-component cementitious adhesive modified with latex-type polymers with high adhesion and flexibility to obtain highly effective adhesives in installations of low absorption coatings or high coefficients of linear expansion, such as some natural stones and ceramics. low absorption (porcelain). Ideal for areas that will be exposed to external environmental conditions, with constant variation of temperature, air currents, presence of rain or high traffic.Thanks to its specialized formulation, in addition to ensuring excellent flexibility and adhesion, it has an excellent level of water retention and wetting, allowing a longer working time than any conventional adhesive and the possibility of installing on absorbent and deformable substrates such as flat fiber cement sheets. . STON MIX® LATEX FLEX is easy to prepare and highly manageable, it does NOT require the application of latex emulsions in the mixing water. You just need to add water. Ideal for use on substrates or coatings that have high deformations.
-
CLASIFICATION NTC 6050-2014C2S1TEH2I2Cementitious adhesive with improved characteristics, deformable, with resistance to sliding, extended open time and high adhesive resistance to heat and immersion in water.DESCRIPTIONSTON MIX® LATEX SWIMMING POOLS is a specialized cementitious adhesive for installing architectural coatings that will be exposed in areas with extreme humidity and temperature. Its modified formulation with latex-type polymers of adhesion and flexibility guarantee highly effective adhesion in low absorption coatings such as vitreous mosaics and / or architectural coatings of medium and large format in ceramic, porcelain, marble, granite and sandstone, with exceptional performance in floor or wall, indoors or outdoors.STON MIX® LATEX SWIMMING POOLS is not a cementitious membrane type waterproofing, it is a mortar with the flexibility required to absorb the dimensional changes of the substrate and / or the coating without having detachments. Of course, the instructions for use must be followed carefully to achieve the required result. Thanks to its exceptional components, it offers high resistance to abrasion, excellent water retention and unparalleled open time. It is easy to apply and great manageability. You just need to add water.
-
CLASIFICATION NTC 6050-2014C2TEH2I2Cement adhesive with improved characteristics with resistance to sliding, extended open time and adhesive resistance to heat and immersion in water.DESCRIPTIONSTON MIX® NIVELA AND PEGA is a specialized cementitious adhesive for leveling the substrate up to 30 mm thick and at the same time allowing ceramic installations, porcelain or natural stone flooring in indoor and / or outdoor environments.Due to its exceptional formulation in the percentage of coarse-fine aggregates and the modification of polymers with high adhesion and flexibility, it offers unsurpassed peel strength on existing substrates coated with ceramic and / or porcelain only at the interior level. In conventional concrete type substrates or cement plates, leveling and exterior or interior ambient installations can be made. STON MIX® LEVELS AND PEGA only need to add water for use. It is easy to apply and great manageability. It has high adhesion at 24 hours and double the compressive strength of conventional mortars.
-
CLASIFICATION NTC 6050-2014C2S1TEH2I2Cementitious adhesive with improved characteristics, deformable, with resistance to sliding, extended open time and high adhesive resistance to heat and immersion in water.DESCRIPTIONSTON MIX @ FLOW is a mono component cementitious adhesive modified with latex-type polymers of adhesion, flexibility and fluidity to obtain highly effective adhesives especially in low absorption coatings such as porcelain, thin or ultra-light ceramic and some natural stones. It can be used on floor or wall, indoors or outdoors.Due to its specialized formulation, it has a greater fluidity than a conventional floor and wall adhesive, favoring the covering and total wettability of the adhesive in demanding formats where this condition is a fundamental requirement for the stability of the installation, such as ceramic or porcelain coverings. light and large. Your property of Fluency does not imply that the mixture has a vertical slip, in the work with the trowel or on the installation, as long as the preparation instructions are followed correctly. Thanks to its exceptional components, it offers unsurpassed adhesion, high flexibility, high resistance to abrasion, excellent water retention and unparalleled open time. It is easy to apply and great manageability. You just need to add water.
-
CLASIFICATION NTC 6050-2014C2TH1I1Cement adhesive with improved characteristics with resistance to sliding and adhesive resistance to heat and immersion in water.DESCRIPTIONSTON MIX® PORCELAIN AND MARBLE is a mono-component cementitious adhesive modified with high adhesion latex, to guarantee the stability of low absorption ceramic tile installations such as porcelain. It is easy to apply and highly manageable. You just need to add water. Applies for some ceramic and natural stone installations.
-
CLASIFICATION NTC 6050-2014C1TNormal cement adhesive with sliding resistance.DESCRIPTIONSTON MIX® MARBLE is a white cementitious adhesive specially designed for the installation of natural stone with absorption greater than 1%, as are most of the marble, travertine, granite, limestone and sandstone. Its formulation guarantees the quality of the aggregates to avoid contamination of organic load that can change the appearance of natural stones irreversibly.It is easy to apply and is highly manageable. You just need to add water.
-
CLASIFICATION NTC 6050-2014C1TH1I1Cement adhesive with improved characteristics with resistance to sliding and adhesive resistance to heat and immersion in water.DESCRIPTIONSTON MIX® PORCELANATO INTERNAL USE is a cement-based monocomponent adhesive for floor and wall tiles for indoor use. Due to its modification with adhesion latex type polymers, it is ideal for low absorption coating installations such as porcelain. STON MIX® PORCELANATO - INTERIOR USE is also suitable for bonding ceramics. STON MIX® PORCELANATO - INTERNAL USE is suitable for floor and wall installations in interior condition, only floor for formats that do not exceed 80 cm dimensions on any of its sides.
-
CLASSIFICATION NTC 6050-2014 C1TNormal cement adhesive with sliding resistance.DESCRIPTIONSTON MIX® CERAMICO is a cementitious adhesive specially designed for the installation of ceramic floor and wall tiles, with maximum absorptions of 18%. It allows easy application and is highly manageable. You just need to add water.